ONOSOKKICounter for digital displacement sensorDG-5100DG-5100 is a high-resolution digital displacement sensor counter that can be installed in a measuring cabinet. With an input frequency of 3 MHz, it has a high-speed counting processing capability that is more than 10 times that of other current products. (Equivalent to the GS-3800 series, 1.2 m/s measuring slide speed) The standard configuration provides support, setting condition storage function, result range (maximum value - minimum value) display function, count weighting function, offset setting function, and various calculation functions. Optional functions in the form of built-in parts are provided, and up to 3 optional functions can be selected for combination. There are 5 optional functions as follows. 1 Analog voltage output function 2 BCD output function 3 Comparison output function 4 RS-232C communication function 5 DC power supply function Performance design that supports 0.1 μm resolution displacement sensors and high-speed counting functions. The same 1.2 m/s can be achieved by converting the measuring rod speed of the 0.1 μm resolution displacement sensor. Optional built-in parts such as BCD output, analog voltage output, and comparison result output can be selected as needed, which is flexible and convenient to use. Displacement sensors with a resolution of 10 μm / 1 μm can be connected and used (interface conversion cable is required and must be purchased separately) Supporting digital displacement sensors GS, BS series (HS series is not supported) Indicator Fluorescent indicator 7-digit Display range 0.0000-±99.9999 [*1] 0.000-±999.999 0.00-±9999.99 mm Input signal 90° phase difference signal (square wave), line drive or voltage signal External control input signal Hold, reset Power supply AC 100 to 240 V Operating temperature range 0 to 50 °C Storage temperature range -10 to 60 °C External dimensions 96 (W) x 48 (H) x 148 (D) Weight 370 g